EN12975 heat pipe solar collector

EN12975 Heat Pipe Solar Collector Output capacity ( liters) ModelVacumm TubeManifold Specification ( mm )Heat PipeBracketDiaXLengthXQty / Absorbing Coating MaterialInner manifoldOuter ShellInsulation100SC58-10-AT58X1800X10 with AL/N/CU/SSMaterial:Red Copper Diameter: 37mm, Thickness: 1.2 mmAluminium Alloy with 2.2mm thicknessCompressed Rock Wool with 58mm thicknessSize: 8.0mm X 14mm X 64.5 mm X 1.2mm Thickness: 0.75 mmAluminium Alloy with 2.2mm thickness120SC58-12-AT58X1800X12 with AL/N/CU/SS150SC58-15-AT58X1800X15 with AL/N/CU/SS180SC58-18-AT58X1800X18 with AL/N/CU/SS200SC58-20-AT58X1800X20 with AL/N/CU/SS240SC58-24-AT58X1800X24 with AL/N/CU/SS300SC58-30-AT58X1800X30 with AL/N/CU/SS Advantage over common ones1: Our Manifold shell is specially designed, this makes our insulation layer is 20 mm thicker than common ones. Better Water Proof2: The frame and manifold is painted with anti-corrosive and anit-ultraviolet layer3: The thickness of the heat pipe is 0.7/0.75mm, generally speaking, it is about 0.1-0.2 mm thicker than common ones. very important4: we always pay more attention to the details,even a small screw,because we always trust quality greatly depend on the details.5: Vacuum Tube: Absorbing Coating with AL/N/CU/SS ,when exposed to sun without water: 300°C, 2 hours to boiling point if using single tube.OEMLogo : print the logo on the carton packageLogo : Emboss into the glass tubePackingStandard Export Carton with the design from customersQualityEvery product must be tested through 8 testing process before packingWarranty10 -15 years for different series